Super Search

Submitted questions will be posted with my response by the following Tuesday or before.
Submitted comments will be moderated and approved within 24 hours.

How long does vinyl flooring offgas?

Question from Jennifer

Hi,

Can anyone tell me how long the worst of the offgassing is from vinyl flooring? I’m living with my parents and I can’t talk them out of installing new vinyl flooring in the kitchen and laundry room.

And can anyone recommend a non-toxic adhesive that can be used with vinyl flooring?

Thanks very much!

Jennifer

Debra’s Answer

Vinyl flooring takes a loooong time to outgas. Definately not recommended.

Offhassing can be accelerated with the use of heat. If your parents would allow it, I recommend closing all the doors and windows, the putting a space heater in the closed room. Let it bake for a few days, then air it out by opening the windows. Repeat this as many times as you need to until you no longer smell the vinyl.

Add Comment

Filtering PVC residue from water

Question from SVE

Dear Debra,

We are on a community well (six other houses) that brings water to a tank house through PVC piping. We had copper piping installed from the tank house to our house. Also, we have copper piping inside our house.

Since there is no chlorine in the water, I understand that a carbon filter would not be practical to eliminate the PVC chemicals – microorganisms can grow quickly in the carbon. The water when tested is very good but they don’t test for PVC. We do have the problems of mineral deposits and a little iron stain on the toilets. (I use vinegar, baking soda and hydrogen peroxide – one at a time.)

Do you know how PVC can be filtered out of untreated well water for (1) drinking and (2) showering? Is there a risk to wearing clothes washed in “PVC water?”

Before we moved to our current house, one thing I noticed when we took a tour of a local bottled water facility using artesian well water was the PVC piping used in their processing! It seems it’s in city water systems, too. What to do?

Thanks so much, Debra, for all the time and effort you put into your outstanding website!

Debra’s Answer

Carbon is the proper filter media to remove PVC, but I do see your problem with the bacteria growth. Find a good local independent dealer of water filters who is accustomed to dealing with the water in your area.. I know you can purchase a chlorinator or you may be able to run your water through an ultraviolet or ozone system first to kill the bacteria before it goes through the carbon.

Add Comment

An Environmentally Friendly Driveway

Question from EPArthur

My husband and I are in the unpleasant position of having to overhaul our driveway. Any way you slice it, its expensive, especially for first-time homeowners. Asphalt seems to be an awful choice but that only leaves us with concrete, right? It was suggested that we try crushed granite or limestone but I don’t think that’s allowed in our subdivision. We’re in the midwest with extremes on both ends of the weather scale, but not for extended periods of time. Any recommendations for putting in an environmentally friendly driveway?

Debra’s Answer

I think what you want is something called “permeable pavement” or “pervious pavement” which allows water to go through instead of running off. Some is made from recycled materials. There is some info on this at Q&A: Synthetic Turf (scroll down) but you can learn more by searching on these terms with your favorite search engine.

Add Comment

Borax

Question from E.L.

Per Hulda Clark’s recommendation in “The Cure for All Diseases”, I’ve been using Borax as my laundry detergent for a number of years now. I always do two rinse cycles–the first with a cup of vinegar added to help get out residue, and the second with just plain water.

It recently occurred to me that boric acid comes from borax, and it is toxic enough to kill insects. I have MCS, and I’m now wondering if wearing clothes and sleeping in bedding washed in borax is hazardous to my health? First of all, is borax toxic or just the boric acid which comes from it? Second, if it is, would the amount of rinsing I do on my laundry loads negate that?

Thank you.

Debra’s Answer

I posted some info on the health effects of borax at Q&A: what are some natural emulsifiers for cleaning products, but let’s discuss it more here.

I hauled out my chemical dictionary to see if you were correct in your logical that “boric acid comes from borax” therefore borax may be toxic.

First, borax is natural sodium borate, found in salt lakes and alkali soils. Once, while driving through Death Valley in southern California, I just had to stop at the Twenty Mule Team Museum in the tiny town of Boron, where much of the borax used in this country is mined. You can see on display the boron right out of the ground. Borax is about as natural a natural mineral as you can get.

Boric acid is a manufactured product made by two methods 1) adding hydrochloric acid or sulfuric acid to a solution or borax and crystallizing or 2) extraction from borax brines with various petrochemicals, then stripped using sulfuric acid.

There are a number of forms of borax listed in my chemical dictionary, they all have uses such as herbicide, weed killer, soil sterilant, fungus control…and borax itself is one of the best things to use to clean mold. So it does have that property of killing micro-organisms, albeit in a natural way.

Now, to get to your question, is wearing clothes and sleeping in bedding washed in borax hazardous to your health? I would say no, or at least, it would be less toxic than other things you might wash your clothes in, like detergent. It sounds like with all the rinsing, it would probably rinse out. It’s not the same as boric acid.

Add Comment

Hard Wood Floor Finish Offgassing

Question from Debra S.

Dear Debra:

My husband and I had our hard wood floors refinished in February of this year. Harco Polyurethane 350 VOC was used. My husband pointed out some imperfections in the finish and the contractor came back and did something which increased the fumes (we found cans of Harco and paint thinner in the garbage).

It is now July and we can still smell chemicals. We moved into the bedroom where the flooring was redone at the beginning of July. Coincidentally, or maybe not, I have not been feeling well. My face is broken out. My nose and eyes are burning. My throat is burning. I’ve been dizzy, sick to my stomach, fatigued, having difficulty concentrating and generally feeling poorly.

Do you have any idea what may have happened and what can be done? I hope we haven’t suffered any permanent ill effects.

Debra S.

Debra’s Answer

I went to the Harco website and found that the product you use is an oil-based finish, which contains more toxic solvents than a water-based finish. I tried to get the MSDS sheet from Harco, but their automatied email system didn’t work, so I can’t tell you exactly what’s in it. But oil-based finishes can outgass toxic chemicals for months. So I’m not surprised you are not feeling well.

The solution is to apply heat to burn off the chemicals more quickly. I suggest not sleeping in this room immediately. And close the door so the fumes don’t get into the rest of the house. Then get a space heater and put it in the closed room. Let it bake for a few days, then air it out by opening the windows. Repeat this as many times as you need to until you feel well in the room.

As to permanent effects, the body is amazingly resisilent and is always tending to health. Stay away from toxic chemicals and it will begin to regenerate itself.

Add Comment

sodium lauryl sulfate

Question from Kerri

I contacted Ecover regarding the use of sodium lauryl sulfate and this is what they said: “Some of our products do contain sodium lauryl sulfate, of vegetable origin, derived from coconut oil. This functions as a surfactant which is listed on our labels.

SLS has a long history of safe use in a variety of cleaning products. Wide-spread Internet rumors regarding its use as being harmful have been investigated by respected publications such as THE WASHINGTON POST and THE BERKELY WELLNESS NEWSLETTER and have been proven to be unfounded. THE AMERICAN CANCER SOCIETY also has an information page debunking the claims.

Please feel free to contact us with any questions or concerns.”

My question is, if it is plant derived does that make it ok to use and non-toxic? I know you recommend this brand to use so I am guessing if it is plant origin derived it is ok? From all that I have heard about SLS’s in whatever form they are in. they are toxic and not safe to use, is this true?

Here are the ingredients, do you know which one is the SLS? “Oxygen chlorine free bleach, plant based non-ionic tensio-active surfactants, enzymes, salts, silicate, citrate, polypeptides, plant based bleach activator, plant based frangrance (lemon type).” Is there a website for people that are new to this whole thing that lists what ingredients are toxic are which are safe to use in all of its different name forms, not just its chemical name? I would have assumed that all the ingredients listed above are safe, since they did not use SLS in the ingredient list.

Thanks

Debra’s Answer

“If it is plant derived does that make it ok to use and non-toxic?” Yes and no. In general, plant-derived ingredients are more bio-compatible with the human body, however there are some plants that have poisons. Some herbs, for example, need to be used with caution.

Coconut is very safe and good for bodies in many ways. Coconut oil is very good for the skin, however, products made from it, such as even coconut oil soap, can be drying to the skin and mucous membranes.

Sodium lauryl sulfate (SLS) is derived from coconut oil, however, it is made by adding sulfuric acid (made from sulfur taken from direct mining or processing of low-grade ores such as coal and petroleum) followed by neutralization with sodium carbonate (a natural mineral).

Like all detergent and soaps, it removes oils from the skin, can cause skin irritation. and is also irritating to the eyes.

You can read more about the health concerns at Environmental Working Group’s Skin Deep website–Sodium Lauryl Sulfate.

Now, to your quesiton, “From all that I have heard about SLS’s in whatever form they are in. they are toxic and not safe to use, is this true?” One of the primary determining factors of toxiciy is method of exposure. There is a huge difference between brushing your teeth with SLS and washing your clothes with it. The primary problem is skin irritation. If you are going to use this product, I would make sure that you have soft water or add a water softener (such as baking soda) to your wash to make sure there are no residues left in the fabric that could irriate your skin. Otherwise, I’m not concerned. Every laundry product and cleaning product contains some similar surfactant.

Add Comment

Natural Sunscreen

Question from Fran

SUNSCREEN: I get some sun everyday and then cover up rather than slather up (with sunscreen!) – but I think I may have found a safe, natural sunscreen for when needed: Mexitan. I was looking at Greenlight (magazine) and checked on one of their biodegradable sunscreens’ ingredients. Mexitan has Active Ingredients: Titanium Dioxide, Zinc Oxide and Inactive Ingredients: Sunflower Oil, Green Tea Extract, Coconut Oil, Almond Oil, Lanolin, Tocopherol Acetate(Vitamin E), Eucalyptus Oil, Ascorbyl Palmitate(Vitamin C)

I had questions about when the minerals (titanium or zinc oxide) are too small to be safe, and can enter your tissues and bloodstream if too small,and noticed Mexitan’s website asserts they have no nanoparticles. Here is Mexitan’s reply:

Thanks for your question. It is one we get a lot these days with people concerned about nanoparticles. The short answer is that Mexitan does not contain any nanoparticles.

The technical aspects of our stuff is as folows. The titanium dioxide and zinc oxide used in Mexitan is micronized (NOT nanoparticles), with a coated variable particle size greater than 100nm but less than 500nm. (Nanoparticles are considered to be less than 100nm in size). This allows our sunscreen lotions to be more cosmetically appealing compared to coarser particles. The protection is less visible, yet remains on the skin’s surface.

….Thanks for your interest.

Eric Allen

Debra’s Answer

This looks pretty good.

Over the weekend my husband and I went kayaking and needed some sunscreen so our skin wouldn’t burn being out in the sun on a three-hour trip. We had to buy whatever we could find at a chain drug store and were pleased to find Neutogena Sensitive Skin Sunblock Lotion. It also contains titanium dioxide, though the inactive ingredients are not natura, and it is unscented. It went on white, so no nanoparticles. While not the best, it was nice to know there was at least a better choice at the drug store!

Still, I want to caution that there are some health concerns about titanium dioxide so I suggest using it as needed, and not just applying it every day. Better to block sun with umbrellas or clothing or stay in the shade when you can.

Add Comment

Sound Proofing

Question from Rosiem

what do you put down on a concrete floor to sound proof it before you cement down tiles?

Debra’s Answer

Hmmmmm. I don’t know. I’ve never done that. Readers?

Add Comment

Love the site

Question from christie

Hi Debra-

I just wanted to say that I love this site. My mother in law sent it to us since me and my husband are trying to get off white sugar and lose some weight. We are also trying to get our children off the “high fructose corn syrup” lifestyle, that seems to be all kids eat anymore as its in EVERYTHING! We started this about a month ago with eating according to the Somersize lifestyle. Its been very good but we still want to have dessert sometimes and thats where your site comes in! So far I have tried the carrot cake with cream cheese icing and it gets 5 stars from my whole family. I made it and even my boys ate it up and loved it! Usually in the past when I have made low sugar things they said they taste funny, but not this one. Thanks so much for sharing these recipes and helping our family get on to a healthy lifestyle.

Debra’s Answer

Add Comment

Drywall danger?

Question from LC

I’m looking for information on drywall compound or what contracters call “mud”. I had a few home improvements done – hardwood put on the stairs (sealed with Polyureseal BP, a very low VOC poly applied off-site several weeks ago and attached with nails only) and we had some bathroom fans replaced. The contractor had to cut new holes for the bathroom fans and then repair the drywall. I started having some dizziness yesterday, and it coincides with the drywall repairs. However, it’s now dry, and it was my understanding that it’s not particularly toxic stuff to begin with and had no odor. Anyone have info? Thank you!

Debra’s Answer

My understanding is that “mud” is not all that toxic to begin with, although the premixed mud can contain some volatile chemicals that outgas pretty quickly. You could use heat to make sure everything is outgassed and see if that works.

Readers, anyone have any other ideas?

Add Comment

Translator

Visitor site map

 

Organic and Healthy

“Pure


“EnviroKlenz"

“Happsy"

ARE TOXIC PRODUCTS HIDDEN IN YOUR HOME?

Toxic Products Don’t Always Have Warning Labels. Find Out About 3 Hidden Toxic Products That You Can Remove From Your Home Right Now.